# Enough installation instructions (v0.1.5 beta)

**URL:** <https://enough.discourse.group/t/enough-installation-instructions-v0-1-5-beta/52>\
**Category:** enough documentation\
**Created:** [May 28, 2026, 2:46pm UTC](https://enough.discourse.group/t/enough-installation-instructions-v0-1-5-beta/52 "2026-05-28T14:46:46Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![0gs](https://yyz1.discourse-cdn.com/flex051/user_avatar/enough.discourse.group/0gs/32/8_2.png) [@0gs](https://enough.discourse.group/u/0gs)\
**Post date:** [May 28, 2026, 2:46pm UTC](https://enough.discourse.group/t/enough-installation-instructions-v0-1-5-beta/52/1 "2026-05-28T14:46:46Z")

</div>

here are instructions for installing enough.

[enough-v015b-2.zip](https://enough.discourse.group/uploads/short-url/ssMafQOLLk1YeWYGQOKmJ4X5avl.zip) (1.1 MB)

you’ll need Administrator privileges on MacOS 13+ and a machine with Apple Silicon, as well as ~50GB of disk space for all the model weights, though ~20GB should suffice for the two “smaller” weights options.

you’ll also need to have homebrew and git installed; the homebrew setup will handle both if you don’t already have them.

open Terminal and run this command:

`/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"`

when it’s done, it will show you three additional setup commands that you need to run, which will look roughly like this (but use the actual ones it gives you as they may vary system to system):

```bash
echo >> ~/.zprofile

echo ‘eval “$(/opt/homebrew/bin/brew shellenv)”’ >> ~/.zprofile

eval “$(/opt/homebrew/bin/brew shellenv)”

```

double-check everything looks good by running `homebrew --version` and `git --version`. if both show you version numbers, you’re ready to proceed.

1. download the latest version above or from github:

2. double-click the `install-enough.command` file. most likely, Gatekeeper will block this command, so open up Settings, scroll to Privacy & Security, scroll to the bottom of that pane, and click the “Open Anyway” button.

3. navigate to `~/enough/shortcuts` and make a copy of the `enough-on.command` file in that folder.

4. you can update enough by running `update-enough.command` when you know there’s a new version available.